fbpx

Getting Started with Revive!®

Written by System X Designs. Posted in Blog

Start-up: New pool construction or renovation (unfilled pool) Remove spray applicator and pour Revive!® into the deep end of the pool as filling begins (32oz per 24,000 gallons). As the water level rises, Revive!® will treat the pool surfaces and source water. When filling is complete, brush/vacuum any settled debris and begin regular water care program.  

Clean Up: Phosphate build-up, severe algae, metals, or scaling (filled pool) If algae is present, brush walls and shock pool prior to application (for best results, circulate for 60 minutes). Turn off pump/filter system. Attach a garden hose to Revive!® bottle and spray entire contents over pool surface (5-7 minutes). Wait 24-48 hours for debris to settle to pool bottom then slowly vacuum to waste. After vacuuming, run filter for 24 hours.

TIPS: Highly contaminated pools typically require two or more bottles. Allow additional time for Revive!® to work in cold water. Revive!® cannot be overdosed – the more it’s used, the more contaminants are removed. Rarely, particles may collect on the surface – just spray with a garden hose to break them up. Spraying REVIVE® on green pool Green to Blue Vacuuming Evolution Pool Service

  Maintain: Routine problem-solving and preventative maintenance With filtration system running, attach a garden hose to the Revive!® bottle and spray over the pool surface twice. Revive!® will work with the pool filtration system to remove clouding particles, phosphates, metals, and other debris. Reapply weekly for best results.

Print

Have more questions?

Quick Contact

This field cannot be blank.

Invalid Input

Captcha
Invalid Input

  • "Just wanted to thank you for a great product. After four weeks of trying several different products and also adding way to much chlorine, we can finally see the bottom of our pool. Added Revive!® at 6PM last night, by the time we went to bed, we could notice a difference and when I got up this morning everything had settled to the bottom. Used the vacuum for about an hour this morning and were swimming this afternoon. Will probably have to vacuum once more, but so glad this product was recommended to us."
    - Donna, Ohio
  • "Easy, simple, worry free…these all describe how my pool maintenance has been since I started using EZ POOL! I have a big pool and it is not a big job with E-Z POOL®, just once a week. Once the pool is open and clear in the spring, I just have Caryl’s experts test my pool sample once a week to make sure the balancing chemicals and pH are good. Algaecides are not needed. Brush, brush, brush, as Caryl recommends and my pool is beautiful all summer! Also, it is gentle to the skin and does not effect your hair color. I highly recommend E-Z POOL®!"
    - Trish, Greensboro, NC
  • “I have used the EZ Spa® now for four years. It is the best spa treatment I have ever used. It makes the water feel really soft and refreshing. I use it once a week and forget it. My spa stays crystal clear. I love this stuff. Not to mention when you use EZ Spa® you don’t have to buy so many other chemicals. I also noticed that EZ Spa® is extremely gentle on the skin. I can’t say enough about how good this stuff is. Try it, you’ll love it!”
    - Terri G., NJ
 
Follow Us