Pepper
The Perfect Ingredient for Salt Water Pools
-
PEPPER® is the perfect ingredient for salt water pools. It is a special blend of select ingredients formulated to work specifically with the unique demands of salt water pools. Adding PEPPER® to your pool will enhance water quality, protect equipment, and reduce overall maintenance.
Use PEPPER® regularly to:
- Increase the life and performance of the salt water generator
- Improve sanitizer effectiveness
- Greatly enhance water clarity
- Limit troublesome pH fluctuations
- Prevent scale buildup on the generator cell, pool equipment and surfaces
- Help maintain low phosphate levels
PEPPER® is compatible with all pool surfaces and equipment, plus there is no waiting to swim. After the initial application, most salt water generators can be operated at lower settings. Use just twice a month to keep your salt water swimming pool perfectly seasoned!
What PEPPER® does for your pool:
- Greatly enhances water clarity – oxidizes debris and enhances filter performance
- Provides extended protection for pool equipment and the generator cell
- Significantly reduces pool maintenance – fewer chemical balance adjustments and less cleaning
What PEPPER® does for your pool:
- Greatly enhances water clarity – oxidizes debris and enhances filter performance
- Provides extended protection for pool equipment and the generator cell
- Significantly reduces pool maintenance – fewer chemical balance adjustments and less cleaning
Step OneBalance...Balance the pool water as follows:
pH: 7.2 – 7.4
Total Alkalinity: 80 – 120 ppm
Calcium Hardness: 250 – 400 ppm
CYA: 40 – 80 ppm
Salt Level: Refer to generator instructionsStep TwoAdd PEPPER®...Add PEPPER® directly in front of jet or broadcast over pool surface with pump running.
Initial dosage: Add 1 lb. per 10,000 gallons
Every 2 weeks: Add 1/2 lb per 10,000 gallonsStep ThreeTest chlorine...Test chlorine level after 7 days and adjust generator as needed. You will find that most generators can be operated at lower settings.
-
Why do I still need acid?
PEPPER® is formulated to control the higher pH normally associated with chlorine generator pools. When a pool has issues with circulation, correct equipment sizing, chlorine demand, or when the chlorine generator must be set to the highest settings to create a chlorine residual, a much higher pH must be overcome due to the generator running for longer periods. The amount of acid needed will be much less than when the pool is not on PEPPER®, but consumers may still need small amounts of acid from time to time.
-
Do I still need to regularly clean my salt cell?
Visual inspection of the cell on a routine basis is recommended. Salt pools on the PEPPER® system will have longer cycles between actual cleaning; in most situations once every season or every other season.
-
Why did my chlorine skyrocket after using PEPPER®?
The PEPPER® formula contains a strong oxygen-based oxidizer that lowers chlorine demand significantly,thus, the chlorine generator should be turned to a lower setting. If the generator is not turned down, it will make too much chlorine.
-
Why is my PEPPER® hard?
The biggest culprit for hardened product is moisture. Moisture tends to make the once loose granules meld together.
-
There are all kinds of “salt products” available, why PEPPER®?
Pepper is a complete salt line in one bottle. Eliminating all the ancillary chemicals available on a wide basis.
-
What are the water balance parameters for a salt water pool?
pH 7.2-7.6, TA 80-120ppm, Ca 250-440ppm, CA 30-80ppm FC 1.5-3.0ppm, TC 1.5-3.0ppm